Ancasta are acting as brokers for the vendor who is not selling in the course of business unless otherwise stated. These details are prepared from information provided by the vendor and are intended only as a guide to give a fair description of the vessel but their accuracy cannot be guaranteed and they do not constitute part of any contract. A prospective buyer is strongly advised to check the particulars and to have the vessel fully surveyed by a qualified marine surveyor. Details are supplied on the understanding that all negotiations shall be through Ancasta brokerages. This vessel is offered subject to prior sale, price change or withdrawal without notice. Please Note: where the vessel’s status shows as “Preliminary”, details of the vessel have not yet been confirmed by the Vendor.
Persico Marine TP52
- Make Persico Marine
- Model TP52
- Year 2015
- LOA 52ft/16m
- Class Performance Sail
- Hull Carbon Fibre
- Keel Fin Keel
- Rig Sloop
- Engine Single Diesel
- Drive Sail Drive
- Layout Aft Cockpit
- Ancasta Ref 35403
- Name Gladiator
Overview"Gladiator" the 2015 TP52 is now for sale.
Built by Persico and project managed by Jason Carrington, this is widely regarded as one of the highest quality TP52's ever built, with absolutely no stone left un-turned in the pursuit of weight saving and ergonomic improvements.
Specifically optimized for an owner-driver, this is the last 2015 boat to leave Super Series captivity and with some recent 2019/20 upgrades for IRC and distance racing, she offers huge bang for buck.
GLADIATOR - TP/IRC 52.
Built by Persico Marine, Italy in 2015
Designed by Judel Vrolijk, project managed by Jason Carrington.
GLADIATOR is a TP52 designed to meet the 2015 TP52 Super Series box rule.
Campaigned successfully on the 2015 and 2016 TP52 Super Series and then more recently been used in the US, with the PAC52 Class and big boat fleets under IRC and ORCi.
Some simple ballast modifications allowed compliance to the PAC 52 rule. This has since been removed.
The boat was built by the world renowned team at Perciso Marine in Italy, with a no-expense-spared build phase, under the watchful eye of Project Manager, Jason Carrington.
Jason Carrington is responsible for boats like RAN and Hugo Boss and is renowned as one of the worlds best boat builders.
The philosophy of this design and build was to not only create the fastest boat, but also build a boat that could be better handled by an amateur, owner/driver.
Pre-preg Carbon fiber deck, hull and superstructure, with Nomex cores.
Built in compliance with Class rules and ISO standards.
Further optimized for IRC racing in 2018 and 2019.
DISPLACEMENT 6904 KG
BULB WEIGHT: 3800 KG
IRC: 1.415 TCC (2019)
ORCi: 429.3 GPH (2018)
2019 - Full new cosmetics.
Hull topsides now painted black with grey and red detail. Name is vinyl.
New cockpit non-skid.
Upgraded rig work for IRC.
Weed cutter added to keel in 2019.
Spars & Rigging
Southern Spars 2015 mast and boom package - Constructed and designed at Southern Spars NZ facility.
High Modulus construction, stiffened 2017, modified 2019 for spin halyard locks and Genoa Staysail halyard
EC6 Future fiber/Southern Spar rigging - serviced annually and latest 2020 - New laterals Starboard side 2019.
Future fiber head stay strop 2020 - New + 1 spare 2019
Head stay foil - Gorilla 2019 - spare extrusion and sleeve
External mast jack - 2019
Instruments mast bracket carbon - Persico 2015.
Mast tube partly re-painted in 2019 incl. spreaders
High modulus Southern Spars 2015
Vang tube carbon - Southern Spars 2015
1 x Bowsprit - New 2020 - built for 2 tacklines and lengthened.
1 x Bowsprit - Persico 2015 - single tack line
Bobstay - Carbo link 2020 - New
Bobstay - Carbo link 2015 - for single tack line bowsprit
Internal Deflector EC6 - Future Fibre 2015
Runner backstay EC6 - 1 new set - covered
Runner backstay EC6 - 2 sets used
Main halyard sheave - 1 used
Gennaker halyard sheaves - 2 used
Jib halyard sheave - 1 used
Southern Spars spin halyard internal locks x 2 - 2019
Southern spar Main, Jib halyard internal lock
Southern spars bullet main lock - 2
Southern spars bullet jib lock - 2
Southern spars bullet spin lock - 4
Running rigging - specifics
Main Halyard - 1 new + 1 spare
Jib Halyard - 2 new + 2 spare
Spin halyard/Red inshore - 2 New + 4 spare
Spin halyard/Green inshore - 1 New + 2 spare
Spin halyard/Red with lock - 1 New + 1 spare
Spin halyard/green with lock - 1 New + 1 spare
Runner tails - 1 new set + 3 spare
Jib sheets - 2 new set + 2 spare
Spin sheet/primary - 1 new set + 2 spare
Spin sheet/peel - 1 new set + 1 spare
Tack lines - 1 new + 3 spare
Deflector legs - 2 new + 1 spare
Genoa Staysail halyard - 1
Dynema top lifelines - 1 set 2019 + 2 spare
SS Staysail sheets x 2
Lots of other spare lines.
All sails built with top spec North or Quantum materials.
Designs comply with TP52 super series rule and input from worlds top designers, as well as in-house input to tailor design for this boat specifically.
All sails regularly serviced and washed.
MNLT-2-18 - North 3Di Raw - 25 Hours
MNAP-1-18 - North 3Di Raw - 20 Hours
L-1-19 - North 3Di Raw - 5 Hours
LM-1-19 - North 3Di Raw - 10 Hours
LM-1-18 - North 3Di Raw - 20 Hours
M-1-19 - North 3Di Raw - 10 Hours
H-1-19 - North 3Di Raw - 3 Hours
J3-1-17 / B Quantum Sails - 14 Hours
J3,5-1-17 / B Quantum Sails - 8 Hours
J4-1-17 / B Quantum Sails - 6 Hours
A1,5-2-16 - North Sails (Red) - 30 Hours
A1,5-3-17 (pk77/sk75/sk60) - Quantum Sails - 15 Hours
A1,5-4-17 (pk77/66) - Quantum Sails (Red) - 10 Hours
A2-2-17 (AX700/600) - Quantum Sails (Red) - 24 Hours
A2-3-17 (AX700/600) - Quantum Sails (Red) - 12 Hours
A2-1-18 - North Sails (Red) - 20 Hours
A2-2-18 - North Sails (Red) - 20 Hours
A2+-1-17 (MK100) - Quantum Sails - 2 Hours
A4-1-16 - North Sails - 1 Hour
SS-1-18 - North Sails
S-1-19 - North Sails
MN-2-15 - NS
Delivery jib - QS J3.5
Winch, pedestal & transmission - Harken/Stay InPhase 2015 RACE spec - weekly serviced
Sheaves, block & pulley - Harken/Winmar
Hydraulic system, rotary pump & cylinder - Harken serviced annually
Rudder - roller bearing - JP3 2018
Stanchions - fully carbon - Persico 2015
Pulpit & pushpit - Persico 2015
Carbon tiller - Persico 2015
Various winch spares
Various hydraulic spares
Spare winch and pedestal handles
Spare pullpit - Persico 2015 x 1
Spare pushpit - Persico 2015 x 1
Spare stanchions x 4
Spare Bow hatch - Persico 2015
Stay In Phase spin retriver system
Jeremy Smith reelers - spin Sheets/halyard
Jeremy Smith control Systems gearboxes - Jib in/out - Jib Up/down
Diverse reelers - spin peel sheet/halyard
Winch and Pedestal package
Stay In Phase pedestal and drop-line system.
2 x carbon low profile pedestals.
6 x 65.3 driven ceramic Harken winches.
1 x 500.2 snubber winch.
Full service history since new.
Spare winch Gear set
Spare winch accessories - self tailor, washers etc
Rudder - roller bearing - JP3
Stanchions - fully carbon - Persico
Pulpit & pushpit - Persico
Carbon tiller - Persico
Twin carbon wheel and pedestal system, with quadrant - Persico.
Bow hatch - Persico
Foot chocks – Persico
Mast Displays x 5 B&G 20/20 + 1 B&G H5000
Displays in cockpit x 3 B&G H5000
B&G Instrument system
Load cell Forestay + V’s
String pot - Rake, deflector
Rudder Angle sensor
Vhf 1 on board
Bilge pump 4 automatic switch
Navigation light – mini led 2015
Internal Led lights
Battery charge unit
Engine lithium battery – 2015
House battery – 2018
2 x Icom Handheld VHF
1 x Panasonic laptop
2 x iPad Mini
1 x Velocitek Prostart
Complete safety equipment Cat 4 monohull TP52
Fenders x 6
Mooring lines x 8
Carbon/fiberglass shipping protections x 6
Boat Cradle - foldable for easy breakdown
Bulb saddles x 2
Covers: Keel/bulb, Rig, pedestal, wheels, Cockpit, winch, headstay foil
Lewmar/Harken Winch handles
Rudder bearing seal kit spare
Tiller + extension
Propeller Gori 2015
Keel bolts spare x 2
Engine - Yanmar 30hp with saildrive
Propeller - Gori
Engine spare parts
Interchangeable wheel/tiller arrangement.
Fully equipped 40’ container with sail storage and workshop
Upgraded jib sail controls to B4 gear boxes enabling precise light sail adjustments
Comprehensive Hardware spares
EU VAT paid and US duty paid