Moody 64

435,000 Tax Not Paid | Swanwick Marina, near Southampton United Kingdom


  • Make Moody
  • Model 64
  • Year 2003
  • LOA 64ft/20m
  • Class Sailing Cruiser
  • Hull Glass Reinforced Plastic
  • Keel Fin Keel
  • Rig Sloop
  • Engine Single Diesel
  • Drive Shaft Drive
  • Layout Centre Cockpit
  • Berths 9
  • Cabins 5
  • Aft Cabins 1
  • Ancasta Ref 32955
  • Name Waterwitch of Southampton


Moody 64 is a remarkably powerful boat, fully capable of fast passage times across the full range of conditions. Her stunning performance derives from the Bill Dixon's hull shape which balances the power of the underwater sections and lead keel with the tall, high aspect ratio, hydraulically powered fully furling cutter rig with self-tacking stay sail. Despite her size, the Moody 64 is easily handled by two people. Sail controls and deck handling systems are powered and controlled from the cockpit with its twin steering wheels, padded helm seats. The raised saloon is breath-taking. It fully exploits the entire width of the generous hull shape and with its large side and forward-facing windows, has high levels of natural light and superb visibility. The rest of the accommodation is equally magnificent. The massive owner's stateroom has full en-suite. Study area, aft of the large and practical chart station, complete with fold-away sea berth. 2 guest cabins forwards, with two toilets and shower compartments, plus a separate skipper's cabin complete with its own facilities. The large galley and spacious saloon.

**Part exchange for a smaller yacht or powerboat would be considered**

Further photos, video and 360 tour available on request.

360 Tour



MOODY 64 CENTRE COCKPIT. WHITE HULL, SHOAL KEEL SAILING CRUISER built by Princess Yachts International plc, Plymouth in 2002 to a 2003 Model year.
Designed by Bill Dixon.
Cherry interior finish.
British Part I registered

LOA (inc. pulpit): 19.35m (63'5")
Length Waterline: 16.55m (54'3")
Beam: 5.33m (17'6")
Shoal Keel: 1.98m (6'6")
Displacement (Light): 28.80 Tonnes (63,360 lb)
Displacement(Full): 31.40 Tonnes (69,080 lb)
Ballast: 10.00 Tonnes (22,000 lb)
All figures approximate

Hand laid glassfibre construction with isopthalic gelcoat backed by initial lay-up of powder bound mat and isopthalic resin. Balsa cored sandwich construction for increased panel stiffness and optimum weight distribution. Hull stiffened by bonded in bulkheads plus frames and stringers. Underwater sections from stem to keel further stiffened by utilising an Aramid (Kevlar) laminate to increase impact resistance. Transom includes powered hinging transom door/swimming platform. Swept teak laid ring deck plus forward and after coachroof areas. Deck stiffened with balsa core, with plywood backing pads in way of deck fittings. Deck edge incorporates raised bulwark with teak cap rail. Inset cavita line in topsides.

Lead/antimony ballast keel, shoal keel with flattened bulb which maintain the same centre of gravity position as the fin keel version. GRP semi balanced rudder mounted on half depth skeg with bronze heel fitting. Rudder supported with stainless steel bar rudder stock.


Masthead rigged cutter with powder coated painted Seldon mast and boom.
Stainless steel standing rigging supporting triple aft swept spreader keel stepped mast. Hydraulically powered furling using Selden Furlex stays for forestay and inner forestay plus inmast furling mainsail system. Hydraulic furling powered by Lewmar Commander. Backstay and boom vang also hydraulically adjustable, supplied by Navtec.
Carbon fibre spinnaker pole In-mast furling

2 x Lewmar 66 CEST electric powered self tailing genoa sheet winches
Lewmar 58 CEST electric powered main sheet staysail sheet and mainsail outhaul winch
2x Lewmar 58 CST secondary winches
2x Lewmar 30 CST mainsheet traveller winches
Genoa sheet tracks with adjustable cars and traveller lines led aft.
Genoa sheet turning blocks
Staysail sheeted to self tacking track
Hydraulic controls for in mast furling, forestay and inner forestay furling
Navtec hydraulic panel for backstay and vang sited in cockpit - New 2016 €3000.

Hood Vertech vertical battened inmast furling mainsail
Hood Dacron furling yankee with foam luff
Hood Darcon furling self tacking staysail
Sails sent to loft every winter to be washed, repaired and stored.

I 24.00m 78'8"
J 7.50m 24'7"
P 21.50m 70'6"
E 7.15m 23'

All figures approximate


Cherry interior finish with white leather upholstery.

Chain locker with access through foredeck hatch. Watertight bulkhead. Chain locker drains directly overboard.

Forward cabin with 2 hi level bunks with lockers under.

Large double berth with deep storage space beneath. Hanging locker, vanity and locker storage for clothing. Opening deck hatch gives light and ventilation.

En suite to the primary guest cabin, the compartment includes a separate shower stall complete with hinging door and electric waste pump out. Electric freshwater toilet plumbed to holding tank. Wash hand basin with mirror. Towel rail, toothbrush and glass holder, toilet roll holder. Floor in decorative teak finish with teak grating in shower area. The compartment is finished in attractive wipe clean laminate finishes. Opening deck hatch give light and ventilation.

Twin single berths with storage space beneath lower berth. Hanging locker and tallboy unit with mirror give good storage. Opening deck hatch and hull topside portlight give light and ventilation.

Accessed from forward of saloon, serving as a day head and facilities for the secondary guest cabin. Separate shower stall complete with hinging door and electric waste pump out. Electric freshwater toilet plumbed to holding tank. Wash hand basin with mirror. Towel rail, toothbrush and glass holder, toilet roll holder. Floor in decorative teak finish with teak grating in shower area. Finished in attractive wipe clean laminates. Opening deck hatch gives light and ventilation

Large C shaped settee to port side with extending leaf dining table. Directors chairs provide additional seating to all sides of dining table. Generous storage space beneath settee. Tankage beneath saloon floor. Built in 2 seater sofa to starboard side with drawer space beneath. Coffee table. Outboard of settee and sofa are topside lockers with hull windows between Hi-fi system integrated in lockers plus video player. Flat screen TV retracts into furniture. Forward of settee is a large cocktail locker. Large fore and aft and forward facing windows light the saloon area. Opening deck hatches and dorade vents give ventilation.

Generous navigation desk with chart stowage beneath lid. Drawer space beneath chart table. Furniture units incorporate space for navigation displays and instruments. Electrical distribution board. Chart table seat covered in water resistant covering. Wet hanging locker aft of chart table seat.

Large U shaped galley one step down from saloon. Twin sinks integrated into Avonite worktop, sinks plumbed to grey water box with float switch pump out. Large stainless steel front opening refrigerator plus separate top opening stainless steel freezer. Gimbaled 4 burner cooker complete with crash bar. Microwave and cooker extractor fan integrated into furniture. Generous work top space with deeply fiddled edges. Stowage lockers for food, crockery, pots and pans plus cutlery drawer.

Aft of chart space on port side study area gives access to owner’s stateroom. Desk space with drawer and locker storage. Air cooled fridge for use on hard indtalled. Fold away single sea/occasional berth. Portlight gives light and ventilation.

Large centreline double berth with deep drawer space beneath. Twin curved seats flowing away from berth with curve fronted lockers above. Generous hanging space, vanity units and storage plus dresser unit to for'd bulkhead with large mirror. Integrated retracting flat screen TV Light and ventilation is provided by opening deck hatch, hull topside port Lights and coach roof portlights plus dorade vents.

En suite to the owner stateroom the compartment comprises a separate shower stall complete with hinging door and electric waste pump out. Electric freshwater toilet plumbed to holding tank. Wash hand basin with mirror. Towel rail, toothbrush and glass holder, toilet roll holder. Floor in decorative teak finish with teak grating in shower area. The compartment is finished in attractive wipe clean laminates. Opening portlight gives light and ventilation.


YANMAR 4LHA-STE (230HP-169.3kw)
4 cylinder turbo charged diesel engine driving through reduction gearbox, bronze P bracket and folding propeller. Engine instrument panel mounted in cockpit. Fuel supply from tank fitted with remote fuel shut off cocks. Sound insulated engine compartment.
Major engine overhaul in 2016 by Yanmar agents.12 sea cocks changed Shaft seal new. Shaft withdrawn.

24 volt
Engine driven 110 amp 24 volt alternator charging ships battery banks. Ships DC system 24 volt wired through battery isolator switches and distribution panel incorporating circuit breaker switches, batteries indicator lights and battery state indicator.
All new sealed batteries renewed in 2015 at a cost on €8,000.00
220/240 volt
Shore support system 220/240 volt ring main
Smart battery charger

Onan 17kw generator at 60htz 1800rpm

Sleipner SP220 bowthruster mounted in integrally moulded GRP tunnel. New joy stick controls at both helm 2016. New motor 2018.

Fresh Water 1,365 Litres (300 Imp gallons /360 US gallons)
Fuel 2,000 litres (440 Imp gallons / 528 US gallons)
Holding 250 litres (55 Imp gallons / 66 US gallons)
All figures approximate

Water heated by a calorifier / 220v immersion heater. New water boiler 2017.,

Cruisair air conditioning
Eberspacher D10W heating - not used in our ownership service required


Plotter & radar
GPS transducer
Chart table:
Furuno NAVnet C Map NT colour LCD plotter with radar overlay. 10" display
ICS Nav 6 Navtex weatherfax
Raymarine Ray VHF radio
Autohelm Series ST60 Speed and log
Autohelm Series ST60 Depth
Autohelm Series ST60 Wind direction & speed instruments
Raymarine ST6001+ autopilot with hand held remote control
2 x Furuno NAVnet C Map NT colour LCD plotter with radar overlay 2 7" cockpit displays
Gamin GPSmap 4010 chart plotter - New
2 x Whitlock Plastimo binnacle compasses

2 x flat screen TVs (1 x 20" in saloon, 1 x 15" in aft cabin) Pioneer DVD with surround sound, CD hi-fi audio and tuner Sony CMJ EX1 micro hi-fi CD/tuner to owners cabin. Sony CMJ EX1 micro hi-fi CD/tuner to primary guest cabin
Four place setting dishwasher
Air cooled fridge for use on hard
Gas detector
Hand operated fresh water pump
Full size domestic Hotpoint washer

Stainless steel Scandinavian pulpit with teak tread, pushpits with integrated teak seats.
Twin stainless steel guardwires with boarding gates and stanchions.
Gate access to powered hinging transom door/swimming platform, with folding swimming/boarding ladder
8 stainless steel mooring cleats.
Fenders & Warps
4 x Large inflatable fenders
Plastic coated guardwires in lieu of standard
50m chain
Lewmar electric anchor winch. New motor 2017 + overhauled spare motor
Whittal ED26 300kg rating stainless steel davits
Steering wheel covers
Cockpit cushions
Salt water tap and supply fitted to anchor locker
Cockpit speakers
New Honda 3.5m dinghy 2018
Honda 1500 4 cylinder outboard 2003 recently serviced

Twin helm position with integrated helmsman's seating complete with padded backrest. Steering based on Whitlock Mamba rod and gearbox installation. Helm position incorporates twin steering compasses. Autopilot integrated with Whitlock Mamba gearbox. Instrument display for sailing instrumentation speed, depth and wind speed/direction, and Garmin plotter. Engine instrument panel and control. Bow thruster control. Hydraulic controls for furling rig and headstays. Separate hydraulic panel for backstay and vang. Cockpit table with insulated drinks storage. Cockpit sole and seats finished in teak. Stainless steel grab handles to each side of companionway. 2 safety harness eyes. Windscreen with sprayhood. Vang + backstay control by Starboard helm renewed 2016 - €3000.

Finance Calculator

Ancasta are acting as brokers for the vendor who is not selling in the course of business unless otherwise stated. These details are prepared from information provided by the vendor and are intended only as a guide to give a fair description of the vessel but their accuracy cannot be guaranteed and they do not constitute part of any contract. A prospective buyer is strongly advised to check the particulars and to have the vessel fully surveyed by a qualified marine surveyor. Details are supplied on the understanding that all negotiations shall be through Ancasta brokerages. This vessel is offered subject to prior sale, price change or withdrawal without notice. Please Note: where the vessel’s status shows as “Preliminary”, details of the vessel have not yet been confirmed by the Vendor.

Advanced Rigging

Enjoy a 10% discount

with Advanced Rigging & Hydraulics on new standing and running rigging when you buy a used yacht through the Ancasta Brokerage network. Also, contact Advanced Rigging & Hydraulics about their discounts on mooring and anchoring system for motoryachts purchased via Ancasta.

Call: +44 02380 454 280
Email: [email protected]
*quote: “Ancasta Brokerage offer”

Or fill out the form