Ancasta are acting as brokers for the vendor who is not selling in the course of business unless otherwise stated. These details are prepared from information provided by the vendor and are intended only as a guide to give a fair description of the vessel but their accuracy cannot be guaranteed and they do not constitute part of any contract. A prospective buyer is strongly advised to check the particulars and to have the vessel fully surveyed by a qualified marine surveyor. Details are supplied on the understanding that all negotiations shall be through Ancasta brokerages. This vessel is offered subject to prior sale, price change or withdrawal without notice. Please Note: where the vessel’s status shows as “Preliminary”, details of the vessel have not yet been confirmed by the Vendor.
Custom built SL33 Cat
- Make Custom built
- Model SL33 Cat
- Year 2012
- LOA 33ft/10m
- Class Performance Sail
- Hull Carbon Fibre
- Keel Multi-Hull
- Rig Aerorig
- Engine Single Outboard
- Ancasta Ref 31717
- Name Foiled
Overview"FOILED" is a custom built, fully foiling cat, using the hulls from the hugely successful SL33 Class.
Above and below the waterline, she has been further developed in EVERY department, making her probably the fastest 30 footer in the world today.
Highly optimised, bigger foils have lowered the foiling crossover considerably and allows her to foil upwind in around 12-14kts, a good way ahead of her rivals.
She also benefits from a bigger than standard rig from Hall Spars, using ultra high modulus throughout.
Currently based in Auckland, but can easily be shipped worldwide, "FOILED" is ready for her next thrill seeking owner.
Morelli and Melvin foiling cat;
The hulls are infused, full carbon with foam core built at Hakes marine NZ.
Rudders and Elevators are designed by Morelli Melvin and autoclave cured and built at Hall Spars NZ.
The hulls are to the standard SL33 One Design rule, but everything else on the boat is custom built in pursuit of the ultimate performance gains
Beam 5.35m without racks
Beam 7.8m with racks
Spars & Rigging
FOILED is using a custom built mast from Hall Spars, that has been increased in overall height from the standard SL33 OD sizing, with immeasurable performance gains vs the standard boat.
Mast height is 17.8m air draft with P of 16.3m
Hall spars High modulus carbon mast, longeron and beams.
Carbon boom in standard modulus from Hall Spars
The jib is on a self tacking system with Harken hardware.
A full race running rigging package is supplied with the boat.
North Sails NZ
MH medium code zero 3DI
Stratis #1,#2 jibs
Stratis radial MH large code zero
Doyle Storm jib and old #1
Rudders and Elevators are designed by Morelli Melvin and autoclave cured - built at Hall Spars.
Boards are 2017 generation and Autoclave cured - built by Hall Spars.
Control system is a lithium ion battery powered hydraulic system with carbon accumulator,
This powers the board rams and the main sheet.
The boards are controlled via a remote or on deck switches and the main sheet is on deck switches.
The rudders adjust via a furler rope drum.
Dock lifting platform;
Lifting dock electronically lifts the boat out of the water so there is no requirement for antifoul.
Powered by 4x bulge pumps it simply plugs into the shore power when raising then unplugs.
To lower it simply sinks via sea cocks.
Deck, board and boom covers.
Enjoy a 10% discount
with Advanced Rigging & Hydraulics on new standing and running rigging when you buy a used yacht through the Ancasta Brokerage network. Also, contact Advanced Rigging & Hydraulics about their discounts on mooring and anchoring system for motoryachts purchased via Ancasta.
Call: +44 02380 454 280
*quote: “Ancasta Brokerage offer”