Fontaine Custom 50 Surfari 50

3,000,000 | Factory United States of America


  • Make Fontaine Custom 50
  • Model Surfari 50
  • Year 2019
  • LOA 50ft/15m
  • Class Sailing Cruiser
  • Hull Foam Core Epoxy
  • Keel Fin Keel
  • Rig Sloop
  • Engine Twin Diesel
  • Drive Sail Drive
  • Layout Aft Cockpit
  • Berths 4
  • Cabins 2
  • Ancasta Ref 33118
  • Name Surfari 50


The Surfari 50 lets you "Get there fast, Have Fun and Get home fast!" Designed to get the family to their favorite anchorages with the toys on board and either home at the end of the day or stay on board in comfort.
Single level indoor/outdoor living, sun shade, great visibility, twin engines, storage space for the SUPs, surf boards, and kayaks the Surfari 50 is designed with your family in mind.
A mobile water front home with a permanent dock.


Design: Fontaine Design Group
Builder: Pacific Seacraft
Hull 1 Delivered 2017

Length Overall 50.22 ft 15.30 m
Length on Deck 46.35 ft 14.12 m
Beam 14.63 ft 4.46 m
Draft 6.6 ft 1.98 m fixed keel there is lifting keel option
Displacement 44,900 lbs 20.3 Metric tons
Ballast 7,000 lbs 3.17 Metric tons


Certified ISO CE Mark Category A Ocean

Infused composite construction with epoxy resin and varying density core-cell core
Owner’s choice of standard Awlgrip colors
Four flush, tinted glass hull ports
Hydraulically operated drop down transom swim platform with teak deck finish and fresh water shower
Custom stainless pocket swim ladder recessed in swim platform
Molded in, structurally integral bow sprit with anchor roller and Code -0 attachment point
Molded in, recessed cove stripe painted to owner’s choice of standard Awlgrip colors
Molded in, recessed V1 and D1 insulated and bonded chain plate attachment points
Molded in, spray deflecting chine on forward one third of hull
Molded in, composite bulwark varying in height from bow to stern
Twin composite blade rudders on carbon fiber stocks, each with emergency tiller attachments
6'-6" lead bulb keel

Infused composite construction with epoxy resin and varying density core-cell core
Owner’s choice of standard Awlgrip colors
All of the deck hardware is either silver anodized aluminum or bead blasted stainless steel matte finish
Teak cockpit sole and nonskid side decks
Secure, drop down offshore companionway entrance
Inside helm station with 360-degree visibility, glass overhead hatches and two drop down 24V glass windows
Deck level galley with serving bar, sink, cook top, 2-drawer fridge and storage lockers



Carbon Fiber mast by Axxon
Standing rigging OYS Nitronic 50 rod
Two sets of tapered aero-foil spreaders
Radar dome
Masthead instruments and navigation lights, spreader lights and deck light
Owners choice of standard Awlgrip colors

Carbon boom by Axxon
In boom furling with rope drive furling drum at end of boom
Hydraulic boom vang by Reckmann
Internal mainsheet
Internal preventer
Built-in sail cover
Two recessed lights

Carbon reinforced fixed sprit with bob stay and fitting for Code 0

Doyle Sails Stratis Technora natural Ultra-light main and self tacking jib
Doyle Sails ODL 6 cruising Code 0 with Navtec 9T torque rope

Mainsheet controlled by hydraulic reverse purchase system with control buttons at helmsman's feet
Self tacking Jib sheet is controlled by hydraulic reverse purchase system with control buttons at port and starboard winch stations
Jib furler is a Furlex 24VDC mounted under deck with controls at port and starboard winch stations
Code 0 furler is a Selden GX 15 top down continuous line furler mounted at the end of the bowsprit
Running rigging Dyneema core with covers


I 64.92 ft 19.79 m
J 17.55 ft 5.34 m
P 59.71 ft 18.20 m
E 19.16 ft 5.84 m
Bridge Clearance 70.00 ft 21.33 m

Total Sail Area 1,324 sq. ft 123.30 sq. m
Self tacking Jib 516 sq.ft 48.00 sq.m
Mainsail 808 sq ft 75.12 sq m


Indoor/outdoor living a hallmark of large catamarans is here on a 50' monohull.

From the helm aft through the cockpit and to the swim platform the deck is one level. Down a few steps to the spacious interior.
The standard specification is for a two cabin one bathroom yacht but there are four options developed/designed and you can adapt these options to suit your desires,
Will your boat have two mirror cabins to port and starboard, or a large master cabin forward and a bunk in the port cabin, or do you want a three cabin boat. Your next choice is one bathroom or two.
Which ever arrangement you choose the fit and finish is exceptional.

Satin finished teak in "driftwood" style
Wide plank teak sole
L-shaped dining settee with ergonomic double angled backrests and 5" cushions in your choice of fabric
Teak table with stainless steel base and glass/bottle storage below table top
Custom brushed stainless-steel sink with hinged faucet and removable chopping block cover
Vitrifigo 24VDC two drawer stainless steel fridge
Kenyon 120VAC electric two burner cook top at exterior galley.
Kenyon 120VAC electric grill cook top at exterior galley.

Staterooms, passageways and head finished with flat, framed panels painted satin white with satin mahogany trim and corner posts
Soles natural wide plank teak
Large forward stateroom with double berth with natural latex non-toxic mattress
Second stateroom converts to salty air office space
Starboard lower level pantry/work station
Built in microwave at lower micro galley.
Built-in Nespresso one-cup coffee maker at lower micro galley.
Slide-out drawers for food storage
Slide-out drawers for custom glass and dish storage
Drop front trash bin
Tecma electric fresh water head and stall shower


Twin Yanmar JH80HP, 4-cylinder common rail engine
SD60 sail drive
21” 4-blade bronze folding prop

FUEL: 2 tanks - 250 gal / 1135 liters
FRESHWATER: 2 tanks - 250 gal / 1135 liters
GREYWATER: 1 tank - 3 gal / 12 liters
BLACKWATER: 1 tank - 30 gal / 113 liters
10 fluid level indicators displayed on Garmin chart plotter

Hubbell 30 amp 50’ shore power cord and hook up
Yanmar standard alternator for charging start batteries plus additional Balmar 95-210 amp high output 24VDC alternator installed on main engine to charge the house banks
Mastervolt Mass-Combi 24/2500 inverter/charger for microwave, coffee maker and AC outlets
Two Lifeline GPL-3100T starting batteries wired to engine, windlass and bow thruster
Four (4) Lifeline GPLL-16T-6V 400 Amp hour service batteries with direct wiring to bilge pumps and battery monitor

LED interior lighting and dimmers
Six Frigast Ocean reading lights
17 Imtra dome lights (red and white) and courtesy lights throughout boat

Tecma electric fresh water head and stall shower
Hot and cold water for galley sink, head sink and shower
Scandvik hot/cold shower on swim platform

Headhunter XR-124 fully automatic and quiet freshwater pump
Five (5) 24VDC bilge discharge pumps with Nitro valves for engine room, main bilge, lazzarette bilges and forepeak
One Whale Gusher manual pump plumbed to main bilge
Black water Sealand T-24 pump
Grey water Sealand T24 pump.
Oil Change Pump


One (1) Garmin GNT gWind System standard pack with two GFD cockpit repeaters for wind, speed, depth and interfacing of all equipment
Two (2) Garmin GPSMAP 8212 multi-function GPS chart plotter with touch screen display and 4G 24nm radar, interfaced with auto pilot
One (1) Garmin GPH Reactor hydraulic Corepack auto pilot with three control heads, aft port and starboard and center console helm
Garmin VHF 200 radio with wireless receiver
Custom piloting/sliding seat on centerline with fold up bolster and foot rest
Jefa WHC 1100 carbon fiber wheel with disengagement unit and drag-link steering
LED navigation and anchor lights
ROCA W50 3-arm windshield wiper system with water jet wash and dynamic park feature

Below deck Lewmar V3 24VDC windlass
Manually operated swing out self-launching 55 lb Delta fast set anchor
60m of short link chain, with space to store the secondary Fortress FX-37 anchor in stow bag
Salt water wash down system


Two (2) Primary 24VDC Andersen 62ST winches with FS ZT finish
Two (2) Secondary 24VDC Andersen winches with FS ZT finish
Two (2) Antal 508.143 triple rope clutches for halyards and mast functions.
Two (2) Harken 725 triple deck organizer for halyards mounted under deck.
Two Seasmart 240 mm folding bow cleats, two Seasmart 175 mm folding mid ship cleats and two Seasmart 175 mm stern cleats
Harken self-tacking jib track and car in silver anodized aluminum
Six Harken silver anodized mast base blocks
Four (4) Harken 3T flush padeyes for outboard sheeting locations on bulwark top
Five (5) Harken 3T flush padeyes for forward halyard tie downs and main sheet deck attachment
One (1) Harken 3T flush padeyes for staysail attachment point on foredeck
Eight (8) Harken 3206 Folding pad eyes in bead blasted stainless steel mounted on roof top for tie down purposes
Six (6) Harken 3206 Folding pad eyes in bead blasted stainless steel mounted in the cockpit for safety tether purposes
Six (6) Harken 76 mm 500 sheaves with three each fit to custom fabricated face plate creating triple through deck block assemblies for halyard underdeck fairleads
Six (6) Harken 76 mm 1990 mast base sheaves for halyard underdeck fairleads
Two (2) Harken HC 8832 Black 55 mm HL snatch blocks for the Code-0 sheets and the genoa halyard tail line

Ten (10) C-quip or custom fabricated, bead blasted stainless steel, flush mounted stanchion bases for 30mm tube rail on port and stbd
Six (6) Niro Petersen bead blasted stainless steel 30mm dia. Customized stanchions with tapered tops and 30mm dia. solid stainless ball on top. Drilled for upper and lower wires.
Two (2) Custom flush mounted bow rail stanchions– 30mm bead blasted stainless steel tube rail on port and stbd with removable wires between
Four (4) Custom length lifeline wires with no covering and adjustable pelican hooks to be fit to boat. Lifelines to be made to be easily removable
Six (6) Seasmart SL 10 XP-SP Smart hooks for fender attachment, three mounted each side
Six (6) custom stainless-steel half round chafe strips blind fastened or glued to sheer line in way of mooring lines
Two (2) Niro Petersen Art. 449 bead blasted chain plate deck fitting for halyard storage forward of the mast
One (1) custom stainless-steel flag pole socket
Eight (8) Custom designed bead blasted stainless steel deck scuppers located in the cockpit area
Four (4) custom made stainless steel drink holders in teak tops placed in the cockpit
Four (4) custom made stainless steel storage bin rings for halyard storage

Two custom trapezoid shaped fore deck hatches fit with Sea Smart dogs, hinges and hold open arms
Large lazzarette for dock lines, fenders, inflatable, bikes, golf clubs
Eleven flush, opening glass Seasmart hatches,
Three custom stainless Manship hatches
Three 400 x 400 flush Perspex hatches on coach roof
Two drop down glass windows

Three (3) piece Galsshape Dura-shield laminated glass window in the front of the pilothouse with frit edges. All glass will be toughened in accordance with EN ISO 12337
Three (3) piece Glasshape Dura-shield laminated side windows with middle section.
The wiper system is a ROCA, W50 pantograph three arm wiper system with black finish, water jet wash system, black stainless steel 38” long blades, wiper control system with two speeds and dynamic park
feature. Control panels is installed at the main helm station.
Two composite drop boards built to be fit into recessed tracks fit between the galley L and the L shaped settee.

Six 50’ dock lines (storage in lazzarette)
Six 12” x 29” Aere inflatable fenders with neoprene fender sox and lanyards
Boat hook, swim ladder and search light
Fire extinguishers, engine spares, flare kit
Hose, nozzle, cleaning supplies
Boatyard tool kit,
Medical kit,
Standard PFD’s x 6
All equipment manuals and owner’s manual

Finance Calculator

Ancasta are acting as brokers for the vendor who is not selling in the course of business unless otherwise stated. These details are prepared from information provided by the vendor and are intended only as a guide to give a fair description of the vessel but their accuracy cannot be guaranteed and they do not constitute part of any contract. A prospective buyer is strongly advised to check the particulars and to have the vessel fully surveyed by a qualified marine surveyor. Details are supplied on the understanding that all negotiations shall be through Ancasta brokerages. This vessel is offered subject to prior sale, price change or withdrawal without notice. Please Note: where the vessel’s status shows as “Preliminary”, details of the vessel have not yet been confirmed by the Vendor.